How can we help?

Lightspeed’s Help Centre is here to provide support, tips and troubleshooting

Setting up your Lightspeed Stand for iPad

If using an iPad Air (4th or 5th generation) or 11” iPad Pro (1st-4th generation), adhere the included spacers onto the enclosure.

retail-LS-stand-spacer_01.png

Connect the USB-C power cable to the opening on the base.

retail-LS-stand-plug-in_02.png

Plug into a power source.

Rotate the USB-C connector to its up position.

retail-LS-stand-USB-connector_03.png

Make sure your iPad is turned on.

Place the iPad onto the USB-C connector. Slowly push the iPad onto the connector until you feel it click into place.

retail-LS-stand-insert-ipad_04.png

Look for the lightning bolt icon next to the battery icon to ensure the iPad is charging.

Position the iPad into the enclosure.

retail-LS-stand-position-ipad_05.png

Place the bezel over the enclosure.

retail-LS-stand-bezel-place_06.png

Press firmly around the edges to ensure the bezel is securely attached.

retail-LS-stand-bezel-press_07.png

Was this article helpful?
0 out of 0 found this helpful